Filament Spool Holder #2
This is the second filament spool holder I designed. It offers low friction and easy, fast adjustment for different spool sizes.
- M8 threaded rod, ca. 22cm
- (2) ball bearings “608 ZZ” or “608 2RS” (inline skate bearing).
- (2) M8 nuts
- (2) large M8 washers
- (1) M8 wing nut
- (1) wooden board (MDF): 20cm * 16cm (base)
- (2) wooden board (MDF): 16cm * 16cm (sides)
- wood screws
- 2 printed ball bearing holders
- 2 printed cone parts
- A bit of wire or foam to press against the fixed-side cone to provide controlled braking